OREGON® Solid Harvester guide bars are specifically designed and manufactured to meet the exacting demands of high speed mechanical harvesting operations. The solid harvester bar provides optimum performance and a long service life in the most extreme cutting situations.

Manufactured using special steel alloys, the solid bar body provides exceptional rigidity coupled with increased resistance to bar rail wear and chipping associated with high feed loads and cold weather harvesting environments.

OREGON® Solid harvester guide bars include the Lubri-Dam™ feature. A dam that helps to keep lubricant where it is needed. Oil in the bar groove is prevented from running out of the bar tail. In tests, the thickness of the oil film on the rails of bars with Lubri-Dam™ increased 135% over the oil film found on bars without Lubri-Dam™. Bar oil hole plugging is reduced because the Lubri-Dam™ deflects sawdust and wood chips away from the oil hole.

All OREGON® Mechanical Harvester bars incorporate the patented CRADLE™ sprocket nose design significantly reducing the risk of premature sprocket nose failure.

These bars are specifically designed for a new range of mechanical harvesting machines utilising a 15mm mounting slot.

The L/B149 mounts have a forward mounting holes and are used on guide bars of 75cm and longer.

Note: Guide bars in the Jet-Fit™ configuration will only be available in 2.00mm (0.080”) gauge for use with OREGON ® 18H mechanical harvester chain.

• A full range of guide bars is available for the cut stump treatment with mechanical harvesting machines. These guide bars apply the solution through an arrangement of discharge holes on the leading edge of the guide bar to achieve maximum coverage of the cut surface.
• These guide bars are only available in 2.00mm (0.080”) gauge suitable for use with OREGON ® 18H chain.
• To ensure maximum coverage of the cut stump, OREGON® special application mechanical harvester guide bars are available in both right and left-handed versions.